Metal gates attract the attention of potential buyers due to their increased structural strength and ease of use after installation. Properly selected and installed according to all standards, the gate will last a long time and will reliably protect the owner's property.Let's look at the main points when choosing used gates. The main advantage of these is the low cost. In most cases, such gates have already served their time, but they have retained their consumer qualities, so they are inexpensive. Such gates are suitable for temporary buildings. In order to avoid serious problems during the installation of the gate, it is necessary to make high-quality measurements of the openings. Welding and plumbing work will be required to fit the gate. This process can take a long time.The ideal option is when a new building is being built under the existing gate. As a rule, these are garages, utility rooms, cold warehouses, temporary buildings, outbuildings.Custom-made gates.It is better to order gates from trusted workshops. The contractor company will bear all responsibility for the manufacture and installation. A positive aspect when ordering gates will be their tight fit to the original dimensions and, as a result, a long service life. On the downside, there is the possibility of running into unscrupulous or inexperienced craftsmen.Basic requirements for metal gates.The thickness of the sheet for the door leaf should be at least 3-4 mm. Such a sheet is more durable than using a 2 mm sheet. The total weight of the gate will increase.The frame of the gate should be made of metal corners with a shelf of 75-100 mm or profile pipes. This frame performs the main supporting function. When opening the gate, the attackers try to bend the corner of the gate.Awnings. For high-quality welding of the hinge to the door leaf, it is better that the steel be low carbon.Installation of the gate.To ensure the reliability of the entire structure, metal gates should be welded onto a channel with a shelf spacing of at least 140 mm.For standard gates using steel with a thickness of 2-3 mm, the use of 2 hinges is suitable, for gates with a larger mass it is more reliable to use 3 hinges. To improve the opening and closing of the gate, especially in winter, a ball bearing lubricated with grease is inserted into the hinge cavity. Watch USA online porn https://mat6tube.com teens, milfs, matures!